log inhelp

Get your own free workspace
View
 

Max's Monster by Wynton

Page history last edited by featheredflowers 3 years, 2 months ago
  1. First get a skinny outline marker
  2. Make a straight line going up to down.  It should be about a soda can long.  This will be the back of your monster.
  3. On the top of that line curve to the right.  Try to make the curve slanting up that curve should be the length of a bottle cap.  This will be of the many spikes on the monsters head.
  4. Now on the bottom of the line make a sharp curve that should at the tip be pointing up.  This is part of your three tails.
  5. Next on what's going to be your first tail from the tip curve back down like you are outlining it but it will to the right of the first line.  You should stop at the place where the tail meets your back line.
  6. Now we will make the feet.  First from the line you just finished drawing (the tail) go straight down until you are a cm away from the bottom of the paper next go straight for a cm.
  7. Now from here go up half a cm.
  8. Next go the the right half a cm.
  9. Now go up cm, does it look like a leg?
  10. Now that you have one leg, you need another.  First go to the left one cm and then go down until you are again one cm from the bottom of the page.
  11. For this leg you copy steps 8 and 9.
  12. Now from the second leg line go on a diagonal up for two inches.
  13. Go up half a cm.
  14. Now for your ahnds, go straight to the left two cm.
  15. Now keep going straight for one cm.  This is your first finger.
  16. Now from the end of the line you just made come back to the right one cm.  The two lines should be less than a pencil length apart.
  17. Now from the end of the line you just made go back to the left one cm.  This will be your second finger.
  18. Now do the same thing you did on step 16.  Go back to the right one cm.  Now you have your second finger.
  19. For your third finger do the same thing first go straight to the left one cm then come back to the right one cm.
  20. From the last line you just made we will finish off the arm.  Just go straight to the right two cm's.
  21. Now go up half a cm for your next arm.
  22. Now go to the left two cm's.
  23. Now for the first finger on your second hand go straight up one cm.
  24. Go the the left one half of a cm.
  25. Now go down one cm.
  26. Now connect line you just finished using with the first hand.
  27. Now the line that is pointing to the right you go up one cm and a half.
  28. Now we make the head the front is a hemisphere you curve it so it is a cm under the top of the page.  The same angle as the top of the soda can.
  29. At the end of the hemisphere jolt down on a leftward angle so it looks like a spike it should only go down one cm.
  30. Now in the part of the hemisphere where it points out the most, a cm under that make a triangle point pointing to the right make sure you put it on the inside of the hemisphere not the outside.  Now you have a mouth on your monster.
  31. Now we make the spikes on the monster's head, first start from the line that jolts down into the hemisphere, continue this line by going up slanting to the right back down slanting left and continue five times until you come to that first line we ever made.
  32. Now connect that line to the spike line making one more spike.
  33. Now we go head back down to the tail we are going to make two more first from the first part of the tail all the way to the left make a line pointing straight up about one cm.
  34. Now go back down and you have two of your three tails.
  35. Next we make the last part of the tail.  On the bottom of the first tail go down one cm and then come back up one cm.  Now we are done with the outline.
  36. Now fill in the whole thing with black.
  37. Now we will make the red nose first on the face where it jolts out the most make a red circle the size of a dialated pupil.
  38. Now for the eye make on small dark blue line about half a cm the bottom aligned with thte top of the nose.
  39. The last tip or cm of the tail should be brown.
  40. Make teeth in the place on the head where it goes in and back out teeth are half a cm long and white.
  41. Add red dots to the teeth fingers and feet.
  42. DONE

Comments (0)

You don't have permission to comment on this page.

PDF version